Paracord is an insanely useful item for preppers and off the grid living.
Our friends at DIY Projects have made an awesome list of all the best paracord knots and hitches.
Learn how to make these useful knots with these easy instructions-
So you want to ride your horse into town to get some chewing tobacco and a new set of spurs, but you don’t know how to hitch a horse. How embarrassing. Hitches are used to bind ropes to objects (whereas knots are technically meant to bind ropes to other ropes), and they are a necessity for the DIY survivalist and any self-reliance connoisseur. Here are four simple hitches that you can make with Paracord (or any rope, string, ribbon, lace, garter belt, whatever, we don’t judge) and practice at home.
What you do with them will no doubt go down in the annals of hitch-tory.
How to Make Four Badass Paracord Hitches
Supplies for Making Four Badass Paracord Hitches:
- (1) Screw eyelet (for practicing)
- (1) PVC Pipe or other straight bar (for practicing)
The Two Half Hitches
The two half-hitches is a part of a family called “binding hitches.” Not surprisingly, these types of hitches are meant to bind and, also not surprisingly, they are typically used in situations where you don’t want/need to quickly untie your hitch. You may have also heard it referred to as a “clove hitch over itself.”
Step 1: Thread the paracord through the eyelet
Step 2: Wrap the paracord around the outside and through the loop that it makes
Step 3: Repeat step 2
Step 4: Pull tight
Once weighted, this simple hitch seats very tightly and can be quite difficult to untie, especially with thinner rope and paracord.
The Tautline Hitch
Unlike the Two Half Hitch, the Tautline Hitch is easy to untie. When it is not weighted, you can adjust its placement on your line easily, making it an ideal hitch for lashing down your tent, tarp, or any other situation where you might need to adjust the length of your line.
Step 1: Wrap the string around the pin and behind itself
Step 2: Wrap the string over itself and through the loop two times
Step 3: Wrap the string over itself and through the loop again (behind, or to the right in this picture, of the other two loops)
With the Tautline unweighted, slide your hitch up and down the line. It should move freely. Then pull tightly on your rope and it should cinch in place wherever you currently have it on the line.
The Slippery Hitch
The Slippery Hitch is ideal for any situation where you may need to untie your hitch quickly. When fastened over an object, the hitch holds strong. But once the object is removed, a simple tug on the string undoes it.
Step 1: Make two loops in your line (inverse to each other)
Step 2: Thread the left loop through the right loop
Step 3: Pull the right loop tight
Step 4: The remaining loop is what will be fastened on your object
When weighted, the loop will tighten up over the object.
Step 5: When you no longer need to fasten to the object, take the loop off and pull either end of the rope
The Trucker’s Hitch
If you only have room in your head for one hitch, the Trucker’s Hitch should probably be it (though if you are that slow…you probably aren’t reading this). While it could be used in any situation where something needs to be secured as tightly as possible, it’s most obvious use is fastening things to the top of your car or into your truck bed.
Step 1: Hitch one end of your rope to a point (Perhaps use one of the hitches you just learned!)
It doesn’t matter how you affix this end, as the trucker’s hitch will evolve from this fixed point.
Step 2: Make a loop in the line outside your initial tie-down point
Step 3: Twist the loop three to four times
Step 4: Make a Slippery Hitch
Take the free end of your line and feed a bite of it through your twisted loop.
Step 5: Tighten up the Slippery Hitch…
For the rest of these tips and instructions, see the full post on DIY Ready!
Like this post?
Be sure to like us on Facebook so you can be the first to know about latest survival tips and off the grid living skills.