Connect with us

Do It Yourself

EMP-Proof Electronics | What You Need To Know

Published

on

Prepping with EMP proof electronics

For many preppers, the threat of electromagnetic pulse (or EMP) is often at the front of their minds. In such an event, the power grid will fail and many of our devices will be useless. Only devices that are EMP-proof will still be usable after an electromagnetic pulse occurs.

Knowing how EMP-proof devices work and how to make your own will give you a leg up during an EMP attack. EMP-proof electronics will help you communicate, get around, and keep your family fed.

A Ray of Hope: EMP-proof Electronics

An electromagnetic pulse or EMP attack could happen for many different reasons, natural or man made.

You may be surprised how many electronic devices can be EMP-proof. It’s all a matter of understanding the science behind it and being able to find or build such equipment.

Click here to read the full article on EMP-proof electronics and how they work.

The Old-School Forgotten Art To EMP-Proof Electronics

As someone that loves to tinker with electronic devices, I am a firm believer in the potential for both natural (odds have increased substantially in the last few months because Earth’s magnetic field is weakening faster than expected) and human-made EMP attacks.

That being said, I also know that many of the worst problems that will come from an EMP attack can be reduced by using older technologies that rely on electronic components which are far less vulnerable to an EMP.

Electronic Devices Are Not As Complex As You Might Think


Raven_Steel_Ad-05

If you find yourself confused by electronic devices, simply remember that every component does one of five things with mathematical precision depending on the materials used:

allows electrons to flow through it

does not allow electrons to flow through it

prevents electrons from flowing until enough of them build up on one end of the component

allows electrons to flow if they are moving in one direction, but not if they try to go the opposite way

atoms within the component may change the organization of their own electrons so that the flow of electricity is accelerated, slowed down, or number of passing electrons increases

Once you understand what each component does, connecting parts in various patterns will create larger devices that meet specific goals.

All you need are the right components and a diagram that shows you how to arrange them.

Electronics Before Integrated Circuit (IC) Electronics

While Tesla and Edison were battling for control of how electricity would be produced and transmitted, most people were relying on oil lamps for light and cranks to start their automobile engines.

Interestingly enough, everything from the first telephones, victrolas, and radios, to televisions and nuclear bombs operated without the use of microchips and other semiconductor components that are highly vulnerable to EMP attack.

via The Old-School Forgotten Art To EMP-Proof Electronics | Self-Sufficiency.

Unless you have been living under a rock, you would be aware of the fact that unfriendly nations the likes of Russia, China and North Korea have nuclear weapons. This poses a serious threat to the free world and as preppers we know that if we are attacked by a nuclear bomb, the electromagnetic pulse created can turn both man-made and natural structures in a wide radius into rubble in seconds. There is no need to mention how it will affect us humans.

The mere EMP from a nuclear blast can disable all electronic devices and appliances within its predetermined radius, depending on the altitude of the explosion. The power grid will definitely be shut down if not destroyed completely. Just thinking about the effects can put anyone in despair, but this has not happened, yet. There are ways by which we can protect ourselves. We can only hope that the human or the feeling aspect of those who intend to do such a thing would surface and keep them from destroying our fragile world as well as our lives.

Check out related articles from our site:

Communication Breakdown – How to Stay in Touch after a HEMP Attack

Why Is Our Power Grid Failing?

What Would Happen If An Asteroid Actually Hit Earth?




Comments
Continue Reading
19 Comments

19 Comments

  1. Pingback: EMP-Proof Electronics | What You Need To Know | Patriot Powered News

  2. Pingback: EMP-Proof Electronics | What You Need To Know | Survivalist Basics | Be Prepared For Anything!

  3. Michael W. Perry

    December 5, 2014 at 7:02 AM

    One solution is to get extremely compact HF/VHF gear like this one:

    http://www.elecraft.com/KX3/kx3.htm

    Keep it inside an EMP-shielded enclosure connected to nothing. Take it out briefly in an emergency to communicate and then put it back inside that shielding.

    –Michael W. Perry, KE7NV

  4. Robert Nichols

    December 10, 2014 at 10:15 AM

    What good will EMP-Proof Electronics do, should an EMP strike? There will be NO electricity and, if battery powered, there will be nothing out there to connect to. All you can do is look at the stuff you have stored on your computer IF it is REALLY possible to make it EMP proof.
    I went through a lot of this years ago when I was still working. As an Engineer I was asked to help prepare a quotation for the Military to build a Missile/Satellite tracking system that was EMP PROOF. It is Near impossible and very expensive.

  5. Scott

    December 10, 2014 at 11:54 AM

    Dear sir/madam/other,

    Please change your font to something that old guys can read. This gray on white thing with small letters is a challenge.

    Thank you,
    Old Guy

  6. Daniel Mount

    December 10, 2014 at 3:45 PM

    The best way to protect your electronics is to wrap a Box with led foil that you can put your cell-phone in that will protect it from EMP. Or as fare as your car is concerned If you can get enough led foil and if you keep your car in a garage then you can staple it on the ceiling and the walls and then also if you can do this then you can just keep all of your Electronics with your car in the garage. The led foil will keep it all safe.

    • R. Grayson

      December 10, 2014 at 7:26 PM

      It’s LEAD foil…and LED Zeppelin, Daniel.

    • PAUL

      December 10, 2014 at 7:39 PM

      YOU CAN GET A METAL TRASH CAN WITH ATIGHT LID AND LINE IT WITH CARDBORAD, JUST MAKE SURE YOUR DEVICES DONT TOUCH THE METAL. YOU CAN USE ALUMINUM FOIL TO COVER A BOX AND TAPE IT WITH ALUMINUM TAPE. YOU DON’T NEED LEAD. IT’S A FREQUENCY, NOT AN EXRAY!

    • Dougie Quick

      August 7, 2018 at 8:24 PM

      Zero confidence in the opinions of people that spell lead”led”.. know what I mean? HOW does any well read educated person even do that?

  7. Pingback: Survival Life: EMP Proof Electronics – What You Need to Know | The Survivalist News

  8. Ryan

    December 11, 2014 at 6:00 AM

    Curious on thoughts on how to EMP proof a fireproof gun safe that only has the digital lock. Thought about having a regular combo lock put in it. My other safe has a digital lock, but if you remove the cover you can use a key.

  9. Pingback: Communication Breakdown - How to Stay in Touch after a HEMP Attack | Survival Life

  10. Pingback: EMP Incoming! | What to Expect from an EMP

  11. Pingback: What are the Effects of EMP on People | Survival Life

  12. Pingback: EMP Effects On People | Electromagnetic Pulse - Survive!

  13. Pingback: EMP Effects On People | Electromagnetic Pulse

  14. Pingback: What to Expect from an EMP | Survival Life

  15. Pingback: EMP Effects On People - Electronic Pulse | Down The Rabbit Hole Media

Leave a Reply

Your email address will not be published.

Trending

Copyright © 2020 Survival Life. This copyrighted material may not be republished without express permission. The information presented here is for general educational purposes only. MATERIAL CONNECTION DISCLOSURE: You should assume that this website has an affiliate relationship and/or another material connection to the persons or businesses mentioned in or linked to from this page and may receive commissions from purchases you make on subsequent web sites. You should not rely solely on information contained in this website to evaluate the product or service being endorsed. Always exercise due diligence before purchasing any product or service. This website contains advertisements.

[email]
[email]
[email]
[email]
[email]
[email]
[email]
[email]
[email]
[email]
[email]
[email]
[email]
[email]
[email]
[email]
[first_name]
[first_name]
[email]
[email]
[index]
[index]
[email]
[email]
[first_name]
[first_name]
[email]
[email]
[if lt IE 9]
[if lt IE 9]
["_setAccount", "UA-29124457-2"]
["_setAccount", "UA-29124457-2"]
["_setDomainName", "contest.io"]
["_setDomainName", "contest.io"]
["_setAllowLinker", true]
["_setAllowLinker", true]
["_trackPageview"]
["_trackPageview"]
['Years', 'Months', 'Weeks', 'Days', 'Hours', 'Minutes', 'Seconds']
['Years', 'Months', 'Weeks', 'Days', 'Hours', 'Minutes', 'Seconds']
['Year', 'Month', 'Week', 'Day', 'Hour', 'Minute', 'Second']
['Year', 'Month', 'Week', 'Day', 'Hour', 'Minute', 'Second']
[email]
[email]
[email]
[email]