How To Make Paracord Survival Bracelets | DIY Survival Prepping

Step 5: Now, start the second section with the free strand on the right. For the rest of the instructions from DIY Projects on how to make a paracord bracelet, click here!

Super Strong Paracord Survival Bracelet

This weave will stand up to just about anything with its boosted durability. They provide a compact and wearable solid and durable rope source. Access to a length of rope can be invaluable in emergencies or outdoor adventures.

Ladder Rack Knot Paracord Survival Bracelet

This weave gives you more paracord than the average weave but not so much that it’s big and bulky on your wrist.

RELATED: Paracord: Everything You’ll Ever Need to Know

Cobra Paracord Survival Bracelet

The bracelet features a tight and intricate pattern, resembling the scales of a cobra, hence its name. It is not only fashionable but also practical, as it can be unraveled in emergencies to provide a strong cord.

It can be used for various purposes, such as securing items, creating makeshift shelters, or even as a lifeline. This bracelet is nice and rugged, giving you a good amount of paracord and strength with this weave.

Supplies:

• 10 feet of paracord
• Side release buckle
• Tape Measure
• Scissors
• Lighter

Instructions:

Step 1: Once you cut your paracord to the desired length (about 10 feet), seal the end using your lighter. You don’t want to be working with a frayed end.

Now, measure your wrist size by taking one end of the paracord and wrap it around your wrist. Lay that section next to your measuring tape to see how many inches long your bracelet will be.

 

Step 2: Let’s first attach the male buckle to the paracord. To do this, fold your piece of paracord in half and pull the ends through the bottom slot of the buckle.

 

Then pull the ends through the loop created by your paracord. Pull them all the way through until the paracord is secured around the buckle.

Pull the ends through the buckle.

Loop the ends of the paracord back through the loop.

Pull tight to secure around the buckle.

Step 3: Now let’s attach the other end of the buckle. Pull the paracord through the slot on the buckle.

Using your measuring tape, slide the buckle along the paracord until you reach your desired bracelet length.

For this example, the bracelet is 6.5 inches. Be sure to include the center of the male end of the buckle up to the end of the female buckle in your measurements.

Pull on the second buckle to the length you measured for your wrist.

You will start your bracelet from the buckle you just threaded.

Step 4: Now we are ready to make our bracelet!

First, pull the left strand under the center pieces and over the right strand.

Then, pull the right strand over the center pieces.

Next, pull the right strand over then under and through the left strand.

After that, pull each strand outward to tighten your first knot.

Step 5: You made your first knot! Now let’s do the same thing, but start with the right strand.

Take the right strand and pull it under the center pieces and over the left strand. For the rest of the instructions from DIY Projects on how to make a paracord bracelet, click here.

Extra Wide Paracord Survival Bracelet

This “dragon’s tongue” weave is extra thick, meaning you have extra paracord on hand for emergencies.

Jagged Ladder Paracord Survival Bracelet

This is a compact weave that is sturdy but not bulky.

Tire Tread Paracord Survival Bracelet

This is one of the paracord survival bracelets woven for easy deployment. The Tire Tread Bracelet combines aesthetics and functionality, making it a popular choice for outdoor enthusiasts and those who appreciate unique and eye-catching accessories.

Whether you’re embarking on an adventure or want to make a fashion statement, the Trilobite Bracelet is a testament to the creativity and versatility of paracord weaving.

Supplies:

• Two 9ft pieces of paracord
• Side release buckle
• Tape Measure
• Scissors
• Lighter

Instructions:

Step 1: For this tutorial, we are going to start with the green paracord. First, fold the green paracord in half to find the center. Take that loop and feed it through the slot on the female side of the buckle.

Pull the ends through and firmly tighten around the buckle. Fold the green paracord in half and pull the loop through the buckle.

 

Pull the ends all the way through the loop and tighten. Pull until the paracord is snug around the buckle.

Step 2: Let’s go ahead and do the same thing with the black paracord to attach it to the male side of the buckle.

Take the black strand of paracord and attach it the same way to the other end of the buckle. Pull it snug around the buckle.

Step 3: Now let’s prep our black paracord to attach it to the green paracord by making some bunny ear loops.

• First, you’ll want to measure the length of your bracelet using your measuring tape. Keep in mind that you want to include half of the buckle in this measurement. For this tutorial, we are making a 7-inch bracelet.
• Using your finger to keep the length of the bracelet intact, fold the two ends down to create two loops.
• Then take the right strand and pull it over the center and under the left strand.
• To finish it off, take the left strand under the center and up through the right loop.

Measure the paracord to the length you want your bracelet. Take your green paracord and fold the ends down to make two loops at the length you measured for your bracelet.

 

Then, pull the right strand over the center pieces and under the left strand.

Take the left strand and pull it under the center pieces and up and over the right loop. For the rest of the instructions from DIY Projects, click here.

Thin Soloman Bar Paracord Survival Bracelet

Thin Solomon Bar Bracelet is crafted by weaving two strands of paracord in a repetitive pattern, creating a braided look that is both visually appealing and durable. This design not only adds a touch of sophistication to your wrist but also offers the practicality of having several feet of paracord readily available in emergencies.

Thin Solomon Bar Bracelet is a favorite among outdoor enthusiasts, adventurers, and fashion-conscious individuals due to its simplicity, versatility, and ability to withstand demanding tasks. This is a great bracelet for those who don’t need a lot of paracord on and want a thinner bracelet.

Slithering Snake Paracord Survival Bracelet

This is another relatively thin bracelet for those who don’t want the bulk. This bracelet features a unique knotting technique that creates a series of interwoven loops resembling the intricate patterns of a snake’s scales.

Whether hiking in the wilderness or attending a social gathering, the Snake Knot Bracelet is a versatile accessory that combines style and functionality effortlessly.

Oat Spike Paracord Survival Bracelet

This simple weave feels good on the wrist and is easy to deploy.

A paracord survival bracelet is a versatile tool that can come in handy for a number of emergency situations. Whether you are a survivalist, frequent hunter, outdoors person, or just value the need to be prepared at all times, knowing how to tie a paracord bracelet is a great skill.

Knowing how to tie several is even better- try making the Cobra Paracord Survival Bracelet and our Tire Tread Paracord Survival Bracelet

In this tutorial, you will learn how to make the Oat Spike Survival Bracelet.

Supplies:

• Two 8 ft pieces of 550 paracord
• Side release buckle
• Tape Measure
• Scissors
• Lighter

Instructions:

Step 1: In order to get started, make sure the ends of your paracord are trimmed and singed. Then, fold each piece in half to find the center points.

Fold both pieces of paracord in half to find the centers.

Step 2: Take the grey piece and thread the two ends up the first slot of the male end of the buckle and back down through the second slot.

Now bring them back down through the second slot. Pull the ends through the loop to fasten the buckle onto the paracord. Pull to tighten.

Step 3: Lay your paracord so the center of the blue piece is behind the grey piece. Cross the blue strands around in front of the grey.

Starting with the right strand, pull the grey strands up and under the blue loop. Do the same thing with the left side, then pull to tighten.

Step 4: Continue on down the bracelet. For complete instructions from DIY Projects, click here.

Sawtooth Paracord Survival Bracelet

It draws inspiration from the jagged edges of a saw blade. This bracelet features a unique weaving pattern that replicates a sawtooth’s sharp and serrated appearance, making it a visually captivating accessory. To create this bracelet, multiple strands of paracord are meticulously woven together in a way that forms a series of peaks and valleys, resembling the teeth of a saw.

The result is a bracelet that stands out with its edgy and textured design. Whether you’re seeking a unique piece of jewelry or a reliable tool for your outdoor adventures, the Sawtooth Bracelet combines creativity and functionality. This compact weave gives you a surprising amount of paracord when you deploy.

90-Second Paracord Survival Bracelet

This quick bracelet deploys in 5 seconds for the ultimate quick deployment! Check out one of my favorite paracord survival bracelets equipped with multiple tools!

Easy Paracord Survival Bracelet

This bracelet is a great one to start out with if you’ve never made a bracelet before.

Shark Bone Paracord Survival Bracelet

On top of looking really cool, this weave is great for keeping a good amount of paracord on hand without too much bulk. On the other hand, this might be a bit more complicated for beginners to follow.

iPhone Paracord Reinforcement