Connect with us
[elementor-template id="151043"]

Do It Yourself

[Video Quick Tip] How To Make A “Hobo Stove” From Scrap

Published

on

Feature | [Video Quick Tip] How To Make A "Hobo Stove "From Scrap

A “hobo stove”(or rocket heater) is an incredibly versatile outdoor cooking tool you can build quickly and easily from scraps you most likely already have around the house. It’s small, lightweight, and because it’s made from scraps it’s easily disposable! If done right, a Hobo stove can be an amazingly efficient outdoor cooking equipment that cooks at insanely high temperatures (you can fry an egg in seconds using only a handful of twigs). Building this tool is a great asset to add to your survival skills and is deceptively simple.

How to Build a Homemade Hobo Stove from Household Scrap

 

“This post was originally by DIYprojects.com and shared with permission”

 

Materials Needed to Make Your “Hobo Stove” Rocket Heater

Supplies:

  • 2 tall cans, about 6 inches across and 10 inches tall (we used paint cans)
  • 1 piece of aluminum flashing, about 3 feet long

Tools:

  • Utility knife/box cutter/knife pliers
  • Tin snips
  • Gloves
  • Permanent marker
  • Measuring tape

Step 1: Create Feed Tube

 Create Feed Tube | [Video Quick Tip] How To Make A "Hobo Stove" From Scrap

How to Make a Rocket Can Heater Photo by DIY Projects (Youtube)


Measure and then cut a piece of flashing that’s 8 inches long. Using the edge of a table or a square edge, bend the flashing into a square or whatever shape you want. This is the feed tube for your heater.

Step 2: Cut Hole for Feed Tube

Cut Hole for Feed Tube | [Video Quick Tip] How To Make A "Hobo Stove" From Scrap

How to Make a Rocket Can Heater Photo by DIY Projects (Youtube)


With a pen, trace the edge of your feed tube on the side of the can you will be using as the base. Use your knife to cut the hole in the side of the can by pressing the knife firmly down and through the metal. Once your hole is cut, fit your feed tube into the hole about  1 1/2-inches deep and adjust fit as needed.

Step 3: Create Stand Tube

Create Stand Tube | [Video Quick Tip] How To Make A "Hobo Stove" From Scrap

How to Make a Rocket Can Heater Photo by DIY Projects (Youtube)


Stack your two large cans and measure the distance from the base to the top. You need to allow 1 inch for flow, so subtract one from the measurement of the total height. Measure and cut a piece of flashing from that measurement and roll into a tube. This will be the stand tube.

Step 4: Cut Hole for Stand Tube

Cut Hole for Stand Tube | [Video Quick Tip] How To Make A "Hobo Stove" From Scrap

How to Make a Rocket Can Heater Photo by DIY Projects (Youtube)


Place your stand tube on the base of your top can. Then, trace and cut a hole in the base of that can the size of your stand tube.

 

Check out the full guide to make a “hobo stove ” from scrap here on DIYprojects.com.

 

Eager to start with your hobo stove plans? Watch the video below from DIY Projects to find out.

There are more than a dozen different versions of rocket stoves available on the market that have a huge range in price. Many of them are big, bulky, and heavy. And let’s face it, when SHTF and you need to be light on your feet, the last thing you’re going to want to carry is a 30-pound stove with you. The great thing about a hobo stove kit is with a little innovation, you can DIY one from some common household items. If you’ve never made one before, you should give it a try. You just need a spare time and some scraps!

Care to share about your own version of a DIY hobo stove? Tell us in the comments section below!

Up Next: Survival Kits For The Prepper On The Go

 

Editor’s Note – This post was originally published on January 10, 2014, and has been updated for quality and relevancy.

Placard | [Video Quick Tip] How To Make A Hobo Stove From Scrap

Continue Reading
5 Comments

5 Comments

  1. jimigreyghost

    January 10, 2014 at 5:31 PM

    What most people call The Hobo Stove is not exactly accurate. What you have described is an accurate description of the original Hob Stove. I am over 70 years old and grew up in the late 1940’s and early 1950’s near railroads with hundreds of real life ingenious hardscrabble Hobos. The original Hobo Stove did not have a separate fire chamber (a can within a can) that is often described. The Hobo Stove I grew up experiencing, was usually a one pound coffee can with strategically located vents and a fuel-feed aperture. Those men traveling with families usually used a three pound coffee can or (what is now called) No. 10 food can or one-gallon paint can.
    Most of them carried a can opener (euphemistically called a “Church Key”), a folding pocket knife, a spoon (and sometimes a fork), a box of strike-anywhere matches, a bedroll, and sundry personal items. The bedroll was usually a Red Cross or military surplus wool blanket. About half of them carried a dedicated cook pot or another coffee can used to cook in. If their cook”pot” did not have a handle, there was usually bailing wire available to form one.
    On numerous occasions I witnessed the speedy manufacture of a Hobo Stove in five to ten minutes. The really good ones could do it in three. They would start by cutting an approximately 3 inch hole in the side of the can near the open top. They would then take the “Church Key” and puncture a series of holes around the top sides and in the bottom of the can. Some would puncture the holes around the bottom sides instead of the direct bottom. This difference was usually predicated on the size of cook pot or can used to cook in. The Hobo Stove can was then turned up-side down and the fire started thru the hole in the side
    Fuel was usually small branches and twigs. However, they would use anything handy, even your wood furniture if you left anything outside.

    • Bonnie

      January 10, 2014 at 8:48 PM

      To jimigreyghost:

      I have made something very similar to what you have described. It was actually with my son at a Scouting event called the Klondike Derby. Yes..a large coffee can, no extra can, it was 10 degrees with a wind chill of -2 and snowing and we had a great fried egg breakfast cooked right on top of that can! Thanks for the post!

  2. Jeffrey Bonneville

    January 10, 2014 at 8:44 PM

    Thanks for the demo

  3. Faye Coleman

    June 15, 2018 at 4:38 PM

    When I was in Girl Scouts, we had what was called a Buddy Burner to cook on. We would take a large metal can, turn it upside down and punch holes with a manual punch type can opener around the can’s side. We had a smaller tuna fish/chicken type can that we rolled up corrugated cardboard tightly cut just a little taller than the can (for the wick) and placed down in the smaller can. Then we melted Gulf wax and poured into the smaller can on the cardboard, making sure all the corrugated holes were filled with wax. When wax was set you could light the cardboard and set the small can under the larger can and put your cookware on top and cook away. So much fun. Everything seemed to taste so much better. Lots of memories. Faye, Jonesboro, GA

  4. Pingback: [Video Quick Tip] How To Make A “Hobo Stove “From Scrap

Leave a Reply

Your email address will not be published. Required fields are marked *

Trending

Copyright © 2020 Survival Life. This copyrighted material may not be republished without express permission. The information presented here is for general educational purposes only. MATERIAL CONNECTION DISCLOSURE: You should assume that this website has an affiliate relationship and/or another material connection to the persons or businesses mentioned in or linked to from this page and may receive commissions from purchases you make on subsequent web sites. You should not rely solely on information contained in this website to evaluate the product or service being endorsed. Always exercise due diligence before purchasing any product or service. This website contains advertisements.